Product Technology

Ceiling Fan Frequently Asked Questions

1. What is the objective of a ceiling fan?
Answer: A ceiling fan provides two purposes:
To supply air flow thereby making the “wind cool factor”.
To circulate the air throughout an area or region.
2. What is the length of down rod used with a ceiling fan?
Answer: With regard to optimum performance, ceiling fan blades ought to be at minimum 2.4 meter from but not higher than 2. 8 meter for the best cool of a room.
3. What’s the distinction between the 4- blade and a 5- blade ceiling fan?
Answer: The main difference in between 4-blade as well as 5-blade is actually appearance. With regard to fans which use similar motors and blade design, a 4-blade fan will move a little more air than the usual 5-bladeceiling fan. The decreased weight enables the motor to spin a little faster increasing the quantity of air moved.
4. How can I clean my ceiling fan?
Answer: At the beginning, turn off the power of your fan. Check the primary fuse container and make sure to turn the power off to that particular part of your house. Then, use the soft clean or fabric – the actual cloth should be lint free. After that, use a soft cloth or brush. The cloth must be hair free. Don’t try to use anything heavier. Moreover don’t spray water on the fan either!
5. How many blades are the best?
Answer: Nowadays ceiling fans are offered with number of blades from one to eight, even though numbers below 3 and above 6 is for innovation or decorative purpose. More numbers of blades results in a greater load on the motor that causes a slower speed. Fans with less blades running at a faster speed will move more air.
6. Can my ceiling fan be adapted to use a light kit?
Answer: Sure. Most of today’s modern fans have a light kit fixed at the bottom of the fan’s switch housing which requires a simple electrical connection. Conversely, it really changes from manufacturer and model.
7. What size fan is required for a specific room?
Answer: Ceiling Fans are commonly available in two dimensions: 52″for large rooms and 42″ small rooms. Many companies offer 30-36″ fans for extremely small areas and 56-60″ fans for bigger areas. The most typical size undoubtedly is the actual 52″ fan, which is usually appropriate for many rooms.
8. Why inexpensive fans may be noisy?
Answer: Inexpensive fans normally lack proper noise-reducing components such as isolation rings along with rubberized cushions in between metal components. These unique noise silencers avoid the transference of noise with the fan towards the ceiling where it’s magnified. Inexpensive fans don’t have these types of components simply because they add additional costs in order to manufacturing. Noise is actually generated since the fan is badly engineered as well as manufactured using short-cuts.
9. What is the reason of my fan running slowly?
Answer: A defective capacitor could cause a ceiling fan to operate slowly or even quit operating altogether. You will find screws that contain the light package or change or cap towards the bottom of the fan. Take out these screws and consider the light kit or even housing cap off. Replace the capacitor from the manufacturer or from where you purchased it.
10. How will I change the direction of my fan?
Answer: You are able to change the actual direction in your fan through pulling about the pull chain. Most fans possess a pull chain to change directions, or perhaps a switch about the fan. For those who have a remote control that included your buy, it will probably have the capability to switch directions. Most versions now include remotes that will help you to switch direction having a moment’s notice.

How to balance a ceiling fan



If you have a shaky ceiling fan, you can save much time and money by learning how to balance a ceiling fan. An unbalanced ceiling fan would also end up damaging the motor’s bearing and bushings.
This may make unnecessary fan noise. Below is our step by step guide about how to balance a ceiling fan and prevent your fan wobble.

How to balance a ceiling fan – Basic steps



  1. First and foremost, make sure you turn off the fan’s power at the breaker
  2. Make sure the fan blades are free of dust and build-up. A lot of dust can increase the weight of any of the fan blades hence cause them to wobble. Bear in mind in some cases dust may have build up in several months or even years. If the fan does not stop wobbling after dusting, then there might be a loose or misaligned blade
  3. Inspect all the blades to confirm that they are bolted in firmly. Check the fan’s flywheel. This is the part of the fan joined to ceiling. Once there, make sure the joints between the blade and the flywheel are well bolted. In case you find any loose or missing screws, replace them using a screwdriver
  4. Using a ruler, yardstick or tape measure, check the distance between the ceiling and the end of each blade. This is known as the blade alignment.
  5. In case the blades are not equally aligned, meaning that some of the distances are a little higher than others, bending the blades up or down carefully at the blade holder should help fix the problem. Please use little force not to break anything that attaches to the flywheel. Just use a little bit of pressure to align the blade
  6. Go ahead and switch on the fan to check whether the wobbling has stopped. If the wobbling doesn’t stop, use the balancing kit as follows
  7. Weigh the blades with a balancing clip. You can get a blade balancing kit at almost any home improvement stores. Normally it comes with a U-shaped clip and some small self-attaching weights.
  8. The U-shaped clip should be placed at the center of the blade, then check if wobble decreases after turning the fan on.

4 steps to wobble-free your ceiling fan



  1. Find out the speed that causes the fan to wobble most. Switch off the fan.
  2. Place the clip at the same position on another blade. Watch out for the blade that which helps to stop the wobbling after the clip is placed on it. That would be the blade you need to place weight on.
  3. Find out the best position to place the weight. Start at the center then move the clip towards the end of the blade. Keep turning the fan on to check if the wobbling stops. Also try bending blade gently up and down till the wobbling stops.
  4. Once you spot the specific blade and spot the point on the blade where to place the clip, replace the clip with a stick-on weight found in the kit. It should have a peel-off self-adhesive surface on which you fix it on top of the blade.

How to repair a ceiling fan

It’s a scorching hot day and your ceiling fan just broke. You now have two options — call the fan repair company or haul that step ladder from the basement and repair the ceiling fan yourself. If you are reading this you probably have your foot up that step ladder already so read on for tips on how to get your ceiling fan up and running again in no time.
There are several reasons you might be embarking on your Do-It-Yourself ceiling repair job. It could be because your fan is dead or that there is an annoying hum resonating from it. Whatever the case, you can find specific instructions on each below.

How to repair a ceiling fan that doesn’t work properly

If your ceiling fan does not work properly it is probably because of a power problem. You should make sure that there is no interruption in its circuit either in its switch or its fuse box. Once you have made sure that the fuse box is not the problem, you can check the fan switch following the steps below.

Tools needed

  • Screw driver
  • Pliers
  • voltage tester
  • Wire nut

Step by step to repair your ceiling fan

  1. Switch off the power that leads to the fan. You can then safely unscrew the cover plate from its electrical box.
  2. Locate the screw terminals on the switch’s side and with the aid of the voltage tester, make sure they are not charged before you gently pull out the switch.
  3. Once you have unscrewed the wires from their terminals, straighten them out with the pliers. Now twist their two ends together and fit them into the wire nut.
  4. Turn the circuit back on and check the fan. If it is working you should consider replacing the busted switch.

How to fix a ceiling fan that hums

If your fan did not come with an anti-hum feature you might have to consider replacing its control. Before you make your replacement purchase, make sure that its amperage rating is equal or higher than that required by your fan. You must also make sure that it is compatible with your fan.

Tools needed

  • Screw driver
  • Wire nuts
  • Pliers
  • New anti-hum fan control
  • Voltage tester


  1. Make sure the fan is off and that you have cut its power at the fuse box.
  2. Detach its faceplate and switch. For extra precaution, use the voltage tester to make sure the wires are not charged before you disconnect the wires.
  3. Using the pliers, straighten the wires and bind them together to the wires of the replacement fan control.
  4. Attach the wire nuts, screw the control to the electrical box then fix back the faceplate. You can now switch the fan power back on
The processes given above are fairly simple to carry out and will definitely help save on some hard earned cash. They are however not to be carried out if you are unclear on how you should handle some of its elements. Instead call up a technician to repair your ceiling fan.
Ceiling fans are very important in creating cool breezes especially during summer when it is hot. There is no mechanical difficulty when installing a ceiling fan and most of them will have good installing instructions. However most fans are very heavy and it is considered wise to have someone to help when trying to install one. In the case of a ceiling fan, there is a need for it to be properly anchored to an electric ceiling box as this will help in holding it in place. These kinds of fans usually have separate light kits hanging below the fan. In most cases, the electrical cables are have three conductors which serve different purposes. One of them is black whose work is to carry hot feed, the other one is a white one and this is for the neutral, while the third one is an uncovered copper wire which is used for the earth. A red wire is also needed and this serves to control the light using a switch that is detached from the fan.

Things you will need to install a ceiling fan

  • Your ceiling fan
  • light bulbs
  • ladder
  • a wrench that is adjustable
  • wire strippers
  • screw driver
  • utility knife
  • wire nuts
  • a cordless drill with screw tip
  • and a circuit tester

Steps to wire a ceiling fan

  1. Before attempting to do anything you must ensure that power is off. You can do this by turning off power from the circuit breaker that will provide power for the fan circuit. In order to ensure that you have turned the power off, you can check the wiring of the switches which are for the fan. This can be done using a non-contact wire. It is always considered wise to stick a sign onto the power panel in order to ensure that no one turns the power on while you are working.
  2. Using a utility knife, cut the outer casing from the electric wire in the box in the ceiling because this is where the wire ceiling fan will be mounted. This should be up to five to seven inches. After doing that then you will remove half an inch of the highlighted padding from all the three wires that are insulated. Use wire strippers for this.
  3. The ceiling fan kit has two fastening screws and these will be used to help you to install the wire ceiling fan support plate into the electric box that is in the ceiling of your house. A screw driver will also be needed in addition with the two fastening screws. After that then it is time you feed all the wires-the white, black, red and the copper wires via the hole that is at the middle of the support plate.
  4. The motor for ceiling fan should be placed on to the floor in order to give you enough space and to position you well for putting the canopy above the motor. The wiring of the fan should be then passed through the hole that is at the middle of the fan canopy. The other wires should then be passed via the down rope pipe and then screw it above the fan. After putting the wires in place it is time now to fasten the rod back in place and this should be done by fastening and locking the bolt using tunable wrench.
  5. At this step you will lift all the assembled fan kit to the supporting bracket and then suspend the canopy from the support plate. There are two black wires one from the fan kit and the other from the electric box and their ends should be connected together using wire nuts. Similarly, the white cased wires should be connected just like the black ones. However, for both the green wires remaining, these should be connected to the uncased copper wire. The wire coated in red, on the other hand, should be connected to the other remaining wire that is from the fan. Remember that electrical boxes that are used for holding ceiling lights are usually not strong enough for holding ceiling fans. Because of this you should ensure that you replace the existing one with the one that is specially designed for holding ceiling fans.
  6. Detach the canopy that is hanged from the hook and place it on to the support bracket. There are two holes on both sides of the canopy and these should be used to mount the canopy onto the support bracket using two support screws.
  7. Attach the fan blades to the blade iron using screws. After that the blades should be attached to the motor using the blade fastening screws. The screws used for this job should be driven in slowly and carefully in order to avoid stripping and make sure that they are securely tightened. You should also be careful with the blades in order to ensure that you do not bend them.
  8. Below the fan motor, there are wiring harness hanging on it and the ceiling fan’s light kit should be attached on to them. When attaching them to the motor, this should be done by fastening the support screws. After that, install the lamb globes and the light bulbs to the lighting kit.
  9. Finally, you should now switch on your power source and turn on your circuit breaker to test whether the fan and the lighting kit are working. Other fans are made with pull chains and if yours is one of these then you will have to turn your wall switches on then pull the chains in order to activate your fan and the light kit. If the fan and the light are working then it is high time you enjoy that cool breeze, you so desperately need.

The bottom line

Installing a ceiling fan is very simple. Anyone can install it as long as you have all the needed equipment as well as instructions to guide the installing process. Ceiling fans are very good in creating cool brazes and this reduces all the strain of using an air conditioner. These fans are not only used during the summer only but they can also be used during the winter where they help in reducing cold by circulating heated air in a room. If you are installing a new fan where one did not exist, you should first consult with the building code to determine if you need any permit. Always remember to turn off electric power before starting any installation work and never rely on wall switches for protection against electrical shock.